This report was the first of its kind to analyze the green job market in MI (3% of workforce) through an analytical (industrial and occupational trends), qualitative (focus groups), and quantitative (employer survey) approach. Discussed are Michigan's green related industries and occupations, and also tracking them. It's concluded that the MI green job market has further potential and is growing despite an economic downturn.

This resource is composed of materials from Wayne State University's professional development workshops which are designed to introduce educators to hybrid electric and electric vehicle fundamentals. Included materials are an event agenda, faculty presentations, and fliers.

This file includes the lab manual write-up for the Au nanosphere and nanorod photoabsorption and scattering Lab experiment for the 2nd year Experimental Contemporary Physics Lab Course. In addition, several handouts are provided along with some additional information for instructors. This work was supported in part by by NSF Awards: ECCS #0701703, DMR #0707740 & DMR #1105121. The experiment can readily be upgraded to an advanced lab by giving more responsibility to the students for lab setup (give them an optical breadboard and parts) and by asking for more in-depth analysis and questions which require more knowledge and experimental skills to answer.

This resource contains presentations from one of the Center for Automotive Research's (CAR's) breakfast briefings titled "Automotive Fuels and Emissions: Policies, Compliance, & Potential Impact of Future Technologies." This briefing occurred on 12/5/13 at Robert Bosch LLC in Farmington Hills, MI. At the briefing presenters discussed the strategic implications of Tier 3 regulations which will soon be finalized and may impact future technology decisions in a multitude of ways. The impact of Tier 3 emission regulations is expected to be far reaching as they have the potential to influence the quality of fuel, as well as usage of alternative fuels and powertrains. Further, the regulations will have a direct influence on the technologies, such as diesel and gasoline direct injection, that automakers will utilize to meet the fuel economy standards through MY2025. Included in this resource are the presentations from the National Renewable Energy Laboratory (NREL), Volkswagen, and Bosch utilized at the briefing.

This resource contains presentations from the Center for Automotive Research (CAR) 2013 Management Briefing Seminars held August 5-8, 2013. With over 900 attendees from industry, government, media, and academia, the event featured outstanding presentations from industry thought leaders as well as various networking and social events. Using CAR research as a foundation, these seminars revolved around global manufacturing strategies, lightweighting, connected vehicles, powertrain developments, sales forecasting, purchasing, policy, designing for technology, and capital investment.

This resource contains speaker presentations from the 2013 Plug-In Conference and Exposition. This conference took place September 30, 2013 to October 3, 2013 at Liberty Station in San Diego, CA and had the theme What's Next for the Electric Highway? This event brought together automotive manufacturers, component suppliers, electric utilities, government agencies, academia, and the environmental community to collaborate on the next steps in plug-in electric vehicle technology, infrastructure, policies and regulations, and market development.

This resource contains the agenda and presentations from the 2014 Center for Advanced Automotive Technology (CAAT) Conference: You Can't See the Future in the Rearview Mirror. This conference took place on May 2, 2014 at Macomb Community College's South Campus in Warren, MI and was attended by more than 120 individuals representing various high schools, community colleges, and universities as well as multiple government agencies, professional organizations, and industry workforce representatives.

This resource contains presentations from the Center for Automotive Research (CAR) 2014 Management Briefing Seminars held August 4-7, 2014. With attendees from industry, government, media, and academia, the event featured outstanding presentations from industry thought leaders as well as various networking and social events. Using CAR research as a foundation, these seminars revolved around the most important issues facing the automotive industry today: manufacturing, powertrain, sales forecasting, connected and automated vehicles, purchasing, talent, and supply chain.

This resource contains a presentation from a webinar and video of the webinar regarding a study carried out by Ducker Worldwide and funded by The Aluminum Association to evaluate the aluminum content in 2015 model year vehicles and the projected aluminum content growth through 2025. Also included is the executive summary of the study.

This NASA page is an image set illustrating the 20g centrifuge at the Ames Research Center. The photographs include two of human subjects strapped in the place at one end of the centrifuge arm.

This lab uses Tracker video analysis software to measure and analyze the center of mass of a system of two pucks during a two-dimensional collision. Students measure the initial and final velocity vector for each puck and calculate the center-of-mass velocity of the system before and after the collision and show that it is constant. Tracker can automatically calculate and mark the center of mass in each frame, so it is easy to see that the center of mass velocity is constant and calculate its value from graphs of center-of-mass variables. The zip file contains the lab handout, a video showing a 2-D collision of pucks, and the Tracker file. The video copyright is Flashmedia. To open the Tracker file, download and run Tracker from http://www.cabrillo.edu/~dbrown/tracker/. Tracker is free. The videos can be used with other video analysis software; however, the handout has screen captures from Tracker and instructions specifically written for Tracker.

The following course was created by Grand Rapids Community College (GRCC), through seed funding from theCAAT, to train workers for entry level positions in the advanced energy manufacturing industry. The course is designed around OSHA's "Standards for General Industry" and if taught by an authorized General Industry Outreach Training Program Instructor, students should receive an OSHA General Industry 30-hour Safety certification. Instructional materials include PowerPoint presentations, instructor notes, OSHA instructor and student manuals (handouts/assignments), and lesson objectives. All lessons are intended to be taught through PowerPoint presentations with guidance from the included lesson objectives and notes for instructors. The included PowerPoints are original OSHA presentations modified by GRCC and originals created by GRCC. The lesson topics are: Introduction to OSHA Safety and Health Programs, Hazard Mapping, Personal Protective Equipment, Exit Routes and Emergency Action Plans, Fire Protection and Prevention, Electrical Hazards, Ergonomics and Manual Material Handling, Walking and Working Surfaces, Industrial Hygiene, Flammable and Combustible Liquids Hazard CommunicationExit Routes and Emergency Action Plans, Fire Protection and Prevention, First Aid and CPR, Hand and Power Tool Safety, Machine Guarding, and Control of Hazardous Energy (Lockout/Tag-out).For more information on the course visit https://learning.grcc.edu/ec2k/CourseListing.asp?master_id=777&course_area=CEMF&course_number=102&course_subtitle=00.

These zipped documents from MatEd provide information on designing a course on 3 Dimensional Digital Laser Scanning Fundamentals. At the end of the course, students will be able to identify applications for 3 dimensional digital laser scanning, operate a NextEngine brand 3 dimensional digital laser scanner, and have proposed a project to reinforce these concepts. The documents include a draft syllabus, contact information for the author of the course, a sample new course proposal form, and a course outline.

This web page is a collection of 15 cost-free tools designed to help K-12 teachers use technology in all phases of instruction and assessment. The tools offer time-saving ways to monitor student research and writing, evaluate student performance, and create online lessons, classroom calendars, customized rubrics, tests/quizzes, exportable note-taking organizers for students, and more. 4 Teachers is funded by the ALTEC project, founded to support integration of technology in the K-12 classroom.

This web page contains customizable student checklists for written reports, multimedia projects, oral presentations, and science projects. The checklists are organized for three grade bands: K-4, 5-8, and 9-12. The purpose of the checklists is to help students stay on track during a longer-term investigation, and promote their skills in responsibility and self-evaluating. 4 Teachers is funded by the ALTEC project, founded to support integration of technology in the K-12 classroom. ***PLEASE NOTE: Some of the pages within this resource are sponsored by commercial vendors. The Physics Front neither endorses nor recommends products for commercial sale.

In 1953, Gottfried Moellenstedt invented the electron biprism, more or less by accident, with the serendipity characteristic to him: Aiming at dark-field imaging in an electron microscope, he stretched a thin tungsten wire across the objective aperture to block off the zero beam. However, instead of a dark field image, because of inadvertent charging of the wire under the beam, he found two images of the ZnO-needles serving as an object. Instead of trying the dark field imaging over and over again, he asked what the effect would be if the obtained two images were superimposed. Is coherence given? Moellenstedt, educated by Walther Kossel in diffraction of electron waves, had a vision: Together with his PhD-student Heinrich Dueker, he developed the electron biprism, consisting of a 1 micron m thin wire deliberately chargeable by means of a voltage source, as a beam splitter for coherent superposition of the electron waves passing the filament on the right and on the left. In 1955 they published the first results showing biprism interference fringes [G. Moellenstedt and H. Dueker, Naturwiss. 42, 41 (1955)], which, since then, gave access to the understanding of electron waves and their use for analysis of object structures up to atomic dimensions. Target Audience: 2-4 Year College Faculty/Administrators

9th Grade Math Practice Questions to test addition, multiplication, word-problem skills, and basic algebraic skills. Includes answers and explanations. From the Proficiency Building Activities of the NASA Lewis Research Center K-12 Program.

In this activity from the PTRA Resource Guide "The Role of the Laboratory in Teaching Introductory Physics", students investigate the timing of a traffic light to see if it is appropriately set. This activity provides a real world example of the use of kinematics.

This site presents graphic plots of solar wind and magnetic field data from the Advanced Composition Explorer (ACE) spacecraft.

This APOD page features the first confirmed image of an extrasolar planet orbiting a sun-like star. Text and numerous links provide additional information; one link goes to the press release of the confirmation.

This Astronomy Picture of the Day depicts the Himalayan mountain range in Nepal. The image was taken from the International Space Station. Links provide background information about Skylab, the Himalayas, and plate tectonics.

This Astronomy Picture of the Day shows the "dust flaps" that Apollo 17 astronauts jury-rigged on the lunar rover. The site describes the origin of lunar dust and provides links for further information.

This curriculum guide, from the American Radio Relay League, is "a resource that will help you do what you do best...teach, and teach in a refreshing, captivating way that will bring your students into the world of wireless technology, a journey that will enrich their lives, and our lives." From this site, visitors can either download the basic document or browse the various units and activities listed here. Topics covered include Ohm's Law, Oscillators, Wireless Technology in Robotics, and an Introduction to Ham Radio, among many others.

ATE Central is a freely available online portal and collection of materials and services that highlight the work of the Advanced Technological Education (ATE) projects and centers. These National Science Foundation funded initiatives work with educators from two-year colleges to develop and implement ideas for improving the skills of technicians and the educators who teach them. ATE Central is designed to help educators, students, and the general public to learn about, and use materials from, the entire depth and breadth of the Advanced Technological Education program.ATE Central helps direct users to a full range of high-impact ATE resources available online, including curricula, learning objects, and podcasts. The portal aggregates information about the materials developed by ATE centers and projects, and organizes them using subject taxonomies, context appropriate keywords, and other digital cataloging techniques.

In this video adapted from ATETV, learn how Bristol Community College promotes internships and co-ops to prepare students for work in technology-related careers.

This three credit course offered at Macomb Community College provides an introduction to hybrid electric vehicles (HEVs). Material covered includes alternative fuels, HEV batteries and accessories, HEV maintenance and diagnostics, regenerative braking, and safety procedures. Included educational materials for this course are crosswords, sample exams and quizzes, labs, lesson plans, pre/post assessments, and syllabus. Solutions are not provided with any materials. If you're an instructor and would like complete exams, quizzes, or solutions, please contact theCAAT. This course is composed of ten modules that may be used to supplement existing courses or taught together as a complete course. Module subjects are: Carbon Fuels and the Environment, Intro to Hybrid Electric Vehicles (HEV), Internal Combustion Engine (ICE) Systems, Gasoline and Alternative Fuels, HEV Batteries and Service, Electric Motors, Generators, and Controllers, Regenerative Braking, HEV Transmissions and Transaxles, HEV Climate Control, and HEVFirst Resonder and Safety Procedures

This three credit course offered at Macomb Community College discusses the practical application of hybrid electric vehicle (HEV) power management systems. Areas of study include computer controls of the internal combustion engine (ICE), battery types, HEV thermal management, motors, safety, and HEV/EV accessories. System types, service procedures, and diagnostic procedures are covered for Ford, General Motors, Honda, and Lexus/Toyota vehicles. Included educational materials for this course are homework, sample exams and quizzes, labs, lesson plans, pre-assessment, and syllabus. Solutions are not provided with any materials. If you're an instructor and would like complete exams, quizzes, or solutions, please contact theCAAT. This course is composed of six modules that can be used to supplement existing courses or taught together as a complete course. These modules are Intro to HEVs,Honda HEVs, Toyota HEVs,Ford HEVs, GM HEVs, and Fuel Cells

This four credit course offered by Macomb Community College provides practical training in the theory and basic design aspects of electric vehicle propulsion systems and is a required course for MCC's Electric VehicleDevelopment Technology Certificate. Primary subjects covered include rationale forelectric vehicles(EVs), safety, battery technologies, basic battery testing, electric machine (motor) types, electric machine operation, power management, power inverters, DC to DC converters, accessory systems, and potential future technologies. Educational materials included arethe first day handout, detailed course outcomes, homework (no solutions), labs, pre/post assessments, presentations, sample quizzes/exams, syllabus, and more. If you're an instructor and need access to homework solutions or complete exams/quizzes, please contact theCAAT. This course is composed of nine modules thatcan be used to supplement existing courses or can betaught together as a complete course.These modules are The Need for EVs, EV Safety, Introduction to Battery Chemistry, Battery Pack Integration with Vehicle Systems, Electric Machines (DC Motors, AD Induction Asynchronous Motors, Permanent Magnet Synchronous Motor, and Switched Reluctance Motors), Power Inverter/Electronic Motor Controls, DC to DC Converters, Vehicle Accessory Systems, and Introduction to Advancing Technology (Fuel Cells, Ultra Capacitors, and Hydraulic Propulsion)

Students learn about the concepts of accuracy and approximation as they pertain to robotics, gain insight into experimental accuracy, and learn how and when to estimate values that they measure. Students also explore sources of error stemming from the robot setup and rounding numbers.

This video segment adapted from First Light explains why the highest peak in the Pacific, Mauna Kea, is an ideal site for astronomical observations. Featured are new telescope technologies that allow astronomers to explore the universe in more depth.

In this activity, learners investigate how different materials repel or absorb water. Learners use spray bottles to explore how everyday items like sponges, cardboard, feathers, etc. respond to water differently. This activity also introduces learners to the scientific method as learners make predictions about which materials will absorb or repel water.

This lesson plan provides activities for learning about acceleration, and differentiating between vector and scaler quantities. The distinction between velocity and acceleration is stressed.

This tutorial is comprised of 10 modules that offer information, instructional techniques, and practice labs on how to make the most common needs in distance education accessible for individuals with disabilities, and enhance the usability of online materials for all students. The modules center around topics such as making video, flash, word , PDF and many other documents accessible for students with disabilities.

This post on the AmericaView Blog describes accessing Landsat data and using it in the ArcGIS program. The post includes a link to an instructional video which will show you how to access freely available Landsat satellite imagery and data and then work with it in ArcGIS. Running time for the video is 8:01.

This website provides instructions on how to find and download images directly from the WISE archive. Anyone with an internet connection now has free access to high-resolution infrared images from the WISE mission. These instructions explain how to get the images you want, without using complex terminology and options that may be difficult for the layperson to navigate.

The Acoustic Monitoring Project at NOAA is observing the ocean through underwater acoustics. At this site, visitors can learn about NOAA's studies in Bioacoustics, Ocean Seismicity, and Environmental Noise. The site also offers many animations dealing with Axial eruption, Atlantic Seismicity, and much more.

This article describes covert and overt active engagement strategies for use with elementary students. Find the Question templates are included for use with informational text.

This resource is a collection of introductory physics homework assignments developed as an alternative to traditional textbook exercises. These assignments were designed for use with the Activity-Based Physics instructional method (ABP). Students use observational skills and mathematical modeling, combined with basic physics, to solve problems related to a single situation, such as riding a bicycle or tailgating while driving. Each assignment integrates a variety of concepts and requires students to establish cause and effect relationships. Assignments are available in the following subject categories: mechanics, electricity and magnetism, and waves.

This web page contains an introductory physics homework assignment relating to the motion of a cyclist riding a 12-speed bicycle, developed as an alternative to traditional textbook homework. Students use observational skills and mathematical modeling, combined with basic physics, to solve problems related to the use of a racing bicycle. The problem integrates concepts of torque, friction, force, and acceleration. This item is part of a larger collection of alternative homework assignments designed for introductory physics students. Each assignment poses a series of questions about a single context. To successfully complete assignments, students must think critically about how the physical situation is represented by mathematics.

This web page contains a homework assignment that asks the student to solve problems based on the launch and flight of a rocket. Developed as an alternative to traditional textbook homework, this item is based on the work of the Activity Based Physics project (ABP). Students must make estimations and build their own mathematical models to determine which concepts of classical mechanics apply to each section of the problem set. Topics covered include kinematics, Newton's second law, conservation of energy, and projectile motion. This item is part of a larger collection of alternative homework assignments designed for introductory physics students. Each assignment poses a series of questions about a single context. To successfully complete assignments, students must think critically about how the physical situation could be represented by mathematics.

This web page contains an introductory physics homework assignment relating to roller coaster design, developed as an alternative to traditional textbook homework. Students use observational skills and mathematical modeling, combined with basic physics, to design a roller coaster with specified characteristics. The student must formulate a design that is both safe and provides sufficient energy for cars to reach the end of the track. Concepts explored in this problem include gravity, potential and kinetic energy, circular motion, drag due to friction, center of mass, and acceleration. This item is part of a larger collection of alternative homework assignments designed for introductory physics students. Each assignment poses a series of questions about a single context. To successfully complete assignments, students must think critically about how the physical situation could be represented by mathematics.

This page contains an alternative homework problem related to tailgating and the related physics. Users will be prompted to make calculations about stopping distance in a vehicle traveling at high speed behind another. The problem is designed to allow students to independently explore inertia in motion and the relationship between mass and inertia. This item is part of a larger collection of alternative problems based on physics education research.

Created and presented by Vincente D'Ingianni, Director of Professional Services at Binary Systems, Inc., this PowerPoint demonstration covers how to adapt a Legacy phone system to Voice-over-Internet Protocol (VoIP). In the demonstration, D'Ingianni covers VoIP gateways, Bandwidth, Softswitches, and carriers.

The Adaptive Use Bridge Project website is a repository for work being conducted at the University of Massachusetts, Amherst, in which historic iron bridges are rehabilitated, documented, and analyzed. The purpose of the project is to preserve the civil engineering heritage of New England and to develop instructional material for use in undergraduate civil engineering curricula. Upon completion of this long-term project, a protocol for adaptive pedestrian use of historic bridges will be created.

This paper describes an Easy Java Simulation (EJS) model for students to visualize Newtons 1st and 3rd laws, using frictionless motion and a spring collision during impact. Using Physics by Inquiry instructional (PbI) strategy, the simulation and its problem based inquiry worksheet aim to enhance learning of these two Newtonian concepts. We report results from Experimental (N=62 students) and Control (N=67) Groups in 11 multiple choice questions pre and post tests, conducted by three teachers in the school. Results suggest, at 95 percent confidence level, significant improvement for concept of Newtons 1st Law while not so for Newtons 3rd Law. A Focus Group Discussion revealed students confirming the usefulness of the EJS model in visualizing the 1st Law while not so much for the 3rd Law. We speculate the design ideas for constant velocity motion in the computer model coupled with the PbI worksheet did allow for making sense and experiencing of the 1st Law, where traditional pen-paper representations could not.

A coletânea de artigos constante neste volume apresenta uma série de estudos que cobre uma gama de áreas da Administração Rural, servindo de grande valia tanto para acadêmicos quanto para profissionais atuantes no mercado.

This site presents information about the Advanced Composition Explorer (ACE) spacecraft and its mission, science goals, history, and background. The mission summary includes a brief description of the energetic particles from the sun and from interstellar and galactic sources that are the objectives of the ACE mission. Links to additional information are also supplied.

The following module consists of a PowerPoint presentation, two lab sheets, and a syllabus for modifying automotive engine courses to include HEV technologies and was developedthrough a seed grant from theCAAT. The PowerPoint discusses the application of variable valve timing (VVT) and Atkinson cycle principals to HEVs, and the extra hydrocarbon capturing devices added to HEVs due to the use VVT and Atkinson principles. The lab "Compression Testing VVT systems" reinforces the ideas of the presentation illustrating engine malfunctions caused by a faulty VVT system. For additional insight on HEV engine service procedures, an oil change lab sheet for HEVs is included. For educators looking to modify current courses, the syllabus has highlighted fields where HEV technologies were incorporated to an engines course at Lewis and Clark Community College.

This resource was developedthrough a seed grant from theCAAT and discusses the advanced air conditioningsystems placed inHEVsand safety precautions to follow when servicing them. These systems are high voltage A/C compressors and thecomponents controlling them (A/CECU, HV ECU,and Converter Control Circuit). Safety precautions discussed include Class 0 insulated gloves, insulated tools, color coding of wire looms to indicate voltage, CAT III and IV multimeter use, and properly disabling high voltage circuits. For educators looking to modify current courses, a syllabus is included with highlighted fields where HEVsystems and safety were incorporated into an existing automotive heating and cooling course at Lewis and Clark Community College.

The Advanced Technology Environmental and Energy Center (ATEEC) provides a wide range of environmental and energy technology learning resources for students, teachers, and technicians; the Center does this, in part, through their electronic Environmental Resources Library (eErl) digital library. The Center's objective is the "advancement of environmental technology education through curriculum development, professional development, and program improvement in the nation's community colleges and high schools." ATEEC is housed at Scott Community College (Bettendorf, Iowa) and was established by National Science Foundation (NSF) Advanced Technology Education (ATE) Center funds.

Our brains control every movement we make. Most of us take for granted our ability to pick up a cup or change the television station. However, for people who have lost a limb or become paralyzed, the inability to do these things means a loss of freedom and independence. This video segment from Greater Boston describes how neuroscientists and bioengineers have teamed up to create a system that allows people who have lost motor functions to control electronic devices through their thoughts alone. Grades 6-12

Using exposition, graphics, and commercial videos, this module teaches the theory and application of affinity chromatography in the characterization of proteins, nucleic acids, and other biochemical/biomedical systems. Problems and application examples support the tutorial material.

In this two-day activity (on pages 16-22), learners use a process like that of the Yoruba people of Nigeria to create an African symbol on cloth. Learners first make cassava gel, then paint decorative symbols on cloth, and finally dye it. Learners examine the significance of symbols in African culture and communication, and the use of natural plant products for human projects.

Learn how agricultural technology is changing farming, and one student's life, in this video adapted from Pathways to Technology.

See one adult student's experience attending community college, studying agricultural technology, and discovering career opportunities, in this video adapted from Pathways to Technology.

Do you need proof that driving is a dangerous activity? More Americans have died in car crashes over the past 100 years than in all the wars the U.S. has ever fought combined. More than 40,000 Americans die each year on the nation's highways, most as the result of high-speed collisions. In this video segment adapted from NOVA, learn how engineers developed the air bag, an important automobile-safety device now found in most cars.
Recommended for: Grades 3-12

In this video segment adapted from ZOOM, cast members make their own hovercraft and demonstrate how the air leaking out of a balloon can make a plastic plate hover above a table.

During World War Two, a fierce battle between American and Japanese forces on Kwajalein atoll left a trail of debris on the deep lagoon floor. This lagoon now has one of the largest collections of well-preserved aircraft in the world. In this video, as part of the first ever film crew allowed onto this secret military base, Jonathan explores a B-25, F4-U Corsair and Dauntless dive bomber still sitting on the bottom of the ocean, as if ready to take off. Please see the accompanying study guide for educational objectives and discussion points.

Algerian Journal of Engineering and Technology (AJET) is a scholarly open access, peer-reviewed, interdisciplinary, biannually and fully refereed journal focusing on theories, methods and applications in Engineering and Technology. Algerian Journal of Engineering and Technology (AJET) covers all areas of Engineering and Technology, publishing refereed original research articles and technical notes.

This paper shows how EJS simulations from the OSP Collection can be used to support teaching standards in the US. We describe how ComPADRE tools are used to organize and distribute our materials so that they are easy to find, adoptable, adaptable, and coupled with support content for students and teachers.